Recyclable Print Magnet Sheet
GreenMAG™ print magnet sheets are fabricated by applying a durable printable coating directly to the sheet, making them 100% recyclable and eliminating the need for a laminated printing surface. This prevents delamination issues and facilitates easier, cleaner cutting due to the absence of an adhesive. Our recyclable print magnet sheets are available in standard and custom configurations and roll sizes.
Adams GreenMAG™ – a printable recyclable magnet up to 30″ wide!
A durable printable coating is applied directly to our magnet sheet, eliminating the need for a laminated print surface. This makes it completely recyclable. Send it back to us and we’ll use it to make more GeenMAG™!
Item 22D0019: .030 X 24.313 X 50FT WHITE PRINTABLE MAGNET SHEET
Features
- 100% recyclable
- Won’t delaminate or curl
- No adhesive to gum-up cutting blades
- Contains no phthalates
- Made in the USA!
Applications
- Indoor and outdoor advertising
- Interchangeable graphics
- Menu boards
- Printed premiums
- Vehicle signs (.030″ thick only)
Specifications
- .015” or .020” thick available in up to 24.75” wide rolls
- .030” thick available in 24.75” or 30” wide rolls
- Adams can cut sheets or custom roll sizes in Elmhurst, IL or Carlsbad, CA
- Compatible with, eco-solvent, UV and latex inks
- Inkjet, flatbed and offset printable
- The mounting surface is protected with a clear matte backside coating
- Acceptable for indoor or outdoor use
- Can be supplied magnetized or un-magnetized
- Download the specifications sheet
Resources
Printing Notes for Magnetized Sheet
Cleaning: Not Needed! Do not clean the surface of GreenMAG™ with alcohol or any other solvent before printing. It is ready to accept UV, latex, or eco-solv inks right out of the box. Since it does not have a 4 mil vinyl laminate, GreenMAG™ will feel more flexible and thinner than vinyl, but it still has the same, strong magnetic base.
Magnets and Presses: Before running pre-magnetized GreenMAG™ on wide format inkjet printers, we recommend that you cover any steel sections in the infeed that the magnet passes over. Cover with 10 pt card stock to prevent direct contact and sticking, as shown in the picture below.
Heat Cure Restrictions: Some wide format inks need heat to dry quickly. Because the heavy magnetic base acts as a heat sink, the tendency may be to increase the heat setting to dry the ink. This may cause the magnetic base to soften, and the heavy weight of the stock may cause it to stretch. It is best just to use lower heat and allow the ink more time to air dry.
GreenMAG Recyclable Printable Sheet
GreenMAG uses a durable printable coating applied directly to our magnet sheet, eliminating the need for a laminated print surface. This makes it completely recyclable. Available up to 30″ wide.
Adams Stock Products Catalog 2018
We are delighted to share our 2018 catalog with you. We’ve added updated information about our fabrication capabilities, available in Elmhurst, IL and Carlsbad, CA. We’ve also added new neodymium holding assemblies, a MAGbond Magnetic Media System overview, and high energy wide-format magnetic sheet (40″ wide and still printable!). If you’d prefer to receive a hard copy of this catalog, let us know.
Flexible Magnet Cleaning and Storage
ClingMAG™ combines two separate holding technologies, magnetic holding force, and micro-suction holding force to produce a thinner and lighter magnet that addresses potential challenges with magnet signage. The micro-suction silicon layer on the back helps to reduce magnet particle migration while it increases the holding force of the magnet, keeping it from sliding.
Interested in Learning More?
Adams is ready to be a part of your products with off-the-shelf and custom applications. Contact us to find out more.