Adams offers Neodymium discs and rectangles with adhesive on one side. They are commonly used in packaging, box closure, display and door latch applications. We offer two adhesive choices:
3M 4945 .030” thick foam adhesive provides high strength with the capability of conforming to the irregularities of rigid substrates, even when there might be slight mismatch.
TESA 4970 thin film adhesive is a modified acrylic adhesive with an excellent combination of a high initial tack and adhesion level and thin profile. This adhesive is approximately 1/2 the thickness of the foam adhesive.
• Adams adhesive-backed neodymium magnets are nickel plated to protect them from corrosion.
• Adams adhesive-backed neodymium magnets are supplied in grade 3512, with BHmax of 33-36. Other grades can be special ordered upon request.
• Maximum operating temperature of our adhesive-backed neodymium magnets is 176° F.
• Adams adhesive-backed neodymium magnets are magnetized conventionally through the thickness. In order to achieve perfect alignment with magnet-to-magnet applications, you will need to match magnets with adhesive on the north side of the magnet to magnets with adhesive on the south side of the magnet.
To make ordering your neo magnets with adhesive easier, just find the right size in the charts below (see round or rectangular), and note the Item #. Then contact us to place your order. Dimensions are listed in inches. Additional sizes, plating options and grade choices are also available upon request and may be on hand from stock.
Contact us at 800-763-4795 if you don't see what you're looking for in this brief listing.
| Foam Adhesive Item# | Thin Film Item# | Thickness | Diameter | Grade | Plating | Pole with Adhesive |
| 50W0006 | 50WTA06 | 0.060 | 0.250 | 3512 | Nickel | north |
| 50W0007 | 50WTA07 | 0.060 | 0.250 | 3512 | Nickel | south |
| 50W0008 | 50WTA08 | 0.060 | 0.375 | 3512 | Nickel | north |
| 50W0009 | 50WTA09 | 0.060 | 0.375 | 3512 | Nickel | south |
| 50W0010 | 50WTA10 | 0.060 | 0.500 | 3512 | Nickel | north |
| 50W0011 | 50WTA11 | 0.060 | 0.500 | 3512 | Nickel | south |
| 50W0012 | 50WTA12 | 0.060 | 0.750 | 3512 | Nickel | north |
| 50W0013 | 50WTA13 | 0.060 | 0.750 | 3512 | Nickel | south |
| 50W0014 | 50WTA14 | 0.080 | 1.000 | 3512 | Nickel | north |
| 50W0015 | 50WTA15 | 0.080 | 1.000 | 3512 | Nickel | south |
| Foam Adhesive Item# | Thin Adhesive Item# | Thickness | Width | Length | Grade | Plating | Pole with Adhesive |
| 50W0001 | 50WTA01 | 0.055 | 0.500 | 1.00 | 3512 | Nickel | South |
| 50W0002 | 50WTA02 | 0.055 | 0.500 | 1.00 | 3512 | Nickel | North |
| Thickness | Diameter | Pole with Adhesive | Item# |
| 0.060" | 0.375" | north | 65PW008 |
| 0.060" | 0.375" | south | 65PW009 |
| 0.060" | 0.500" | north | 65PW0010 |
| 0.060" | 0.500" | south | 65PW0011 |
| 0.060" | 0.750" | north | 65PW0012 |
| 0.060" | 0.750" | south | 65PW0013 |
