These rectangular base magnets channel great holding strength onto one large surface. A strong ceramic or rubber magnet is set into a plated steel channel with holes, loops or threaded nuts for mounting.
• Door latches
• Vehicle license plate holders
• Blue print holders
• Sign and banner holders
Channel assemblies are up to 32 times stronger than ceramic magnets by themselves. Pull strength is tested on a flat steel plate 1/2 inch thick. The pull may vary depending on the surface it is attracted to, for example if the steel is less than 1/2 inch thick, coated, rough or rusty. We recommend that you obtain a sample to test and confirm the actual pull / holding capability when used in your application.
Adams can produce rectangular magnet assemblies in just about any color. We can package them in individual bags or other the packaging types you specify.
Most of our magnetic assemblies are made with ceramic magnets, which are brittle and may break if dropped or if riveting is used in their application. Please use caution when handling channel magnets assemblies, their exceptional magnetic force may cause them to attract to metal (or to each other) so strongly that putting fingers in their path could prove painful.
Adams supplies the following channel magnet assemblies from stock, with dimensions listed in inches. We can also make custom channel magnet assemblies to meet your exact specifications. To make ordering your magnets easier, just find the right size on the chart below, and note the item number. Then contact us to place your order. Contact us at 800- 747-7543 if you don't see what you're looking for in this brief listing
| Stock# | Width | Height | Length | Mounting | Pull lbs | Finish | Item# | View Print |
| CH-10-R | 0.875 | 0.25 | 1 | 0.125 center hole | 5 | Nickel | 65CA0001 |  |
| CH-10-C | 0.875 | 0.25 | 1 | 0.125 center hole | 10 | Nickel | 65CA0006 | |
| CH-10-N | 0.875 | 0.25 | 1 | 0.125 center hole | 35 | Zinc | 61ANZ002 | |
| CH-10-2 | 0.95 | 0.313 | 2 | none | 14 | Nickel | 65CB0005 | |
| CH-10-2 | 0.95 | 0.313 | 2 | none | 14 | Nickel | 61B0004 | |
| CH-10-2 | 0.95 | 0.313 | 2.63 | 0.170 side holes | 14 | Nickel | 65CB0002 | |
| CH-32 | 1.045 | 0.46 | 2.7 | 0.187 side holes | 25 | Zinc | 65CJ0001 | |
| CH-32 | 1.045 | 0.46 | 2.7 | loop | 25 | Zinc | 65CJ0002 | |
| CH-3 | 0.906 | 0.25 | 3 | welded nut | 22 | Chrome | 65CI0001 | |
| CH-35 | 1.5 | 0.46 | 3 | 0.260 slots | 60 | Zinc | 65CK0001 | |
| CH-6 | 1.5 | 0.475 | 6 | 0.250 side holes | 100 | Zinc | 65CM0001 | |
| CH-8 | 1.05 | 0.455 | 8 | 0.435 slots | 60 | Zinc | 65CN0001 | |
| CH-8 | 1.05 | 0.455 | 8 | 0.435 slots | 30 | Black | 61N0002 | |
| CH-12 | 0.75 | 0.19 | 12 | 0.150 side holes | 10 | Zinc | 65CC0001 | |
| CH-12-3 | 1.72 | 0.62 | 12 | 0.250 side holes | 150 | Zinc | 65CD0001 | |
| Width | Height | Length | Pull lbs | Finish | Item # | View Print |
| 0.875 | 0.25 | 1 | 5 | Off-White | 61A0012 | |
| 0.875 | 0.25 | 1 | 22 | Off-White | 61A0014 | |
| 0.875 | 0.25 | 1 | 12 | Nickel | 61A0013 | |
| 0.875 | 0.25 | 1 | 32 | Nickel | 61A0015 | |
