Important questions to ask before magnet production

For any successful signage project, communication with clients is critical, and magnets are no different. Though magnets are a low-maintenance signage option, there are still certain considerations to ensure your clients are receiving the best products available. From manufacturing to application, there are elements that can directly affect how the magnet performs in various environments, and they must be identified before you even begin production. (more…)

Question: Justin writes: I was wondering the method or type of tool used to cut .030″ thick magnet sheets? I have an art project and was wondering the best, most clean way to cut the sheet so that it leaves the smoothest edges possible. What do you use for cutting them? Thanks

Answer: Hello Justin. Thank you for the question.  There are a number of ways you can accomplish your goal.  We use special equipment which is designed specifically for use with magnetic sheet.  It is highly automated and developed to handle large volume production runs and may not be a feasible solution for you.  Instead, I think you would be better served by using one of two fairly simple methods. (more…)

Question: David Sharpe writes:  We have a flatbed printer and solvent printer and we are looking for the best magnetic product to use for Car Magnets. One of our clients just had some of the ones that we are using blow off of her car.

Answer: Unfortunately, this issue is not as uncommon as you would think, mostly because there are a number of possible contributing factors.  However, let’s start by addressing your question specifically.

When making magnetic car signs we first have to be concerned with the thickness of the magnetic sheet.  Its thickness is directly related to its strength (pounds of pull).  It has been universally accepted throughout our industry that the minimum acceptable thickness for automobile signs is .030”, also commonly referred to as 30mil.  Anything less than .030” may not provide the pounds of pull required to withstand the external forces an automobile sign is subjected to.
(more…)

Question: Deborah Foster writes: We have a greeting card company and want to expand to refrigerator magnets. What is the least expensive way to get into this and the least labor intensive?

Answer: There are several ways you could expand into refrigerator magnets.  A few ideas include:

1. Tipping or gluing printed magnets into your existing card designs.  The magnets could match the artwork of your current card designs.
2. Adding a magnet strip to the inside front cover of existing card designs.  This would work well if you offer cards that have photo frames incorporated into the cover.  Adams can provide magnetic strips with adhesive pre-cut or scored to the desired size.
3. You could expand into postcard greetings that have magnets glued or laminated to them.

If you want an easy and inexpensive way to make prototypes of your refrigerator magnet ideas, you can use our PrintMAG magnet sheet in your ink jet printer to make mock-ups.

There are companies like Magnetic Attractions or Rainbow Magnetics who print magnets and can package them in bulk or individually for retail, or they can tip/glue and laminate them to card stock.  They can even print the card stock if you like.

Please let us know if you’d like to see samples of what we describe above, or if you have any additional questions.  If you’d like to discuss any of this in person, please give us a call at 800-222-6686.  Thanks Deborah!

pull test equipment in action

Question: “Scott the PAINTER” from California asks: I recently purchased several round base style magnets from the hardware store and they don’t seem to work properly.  I spoke with the folks at the store and they told me there is nothing wrong with them.  They attached them to those orange beams in the store and they worked great.  I am using them on the roof of my car to hold a small sign for my business.  The packaging stated that they would hold 80 pounds.  In the store they felt really strong but when I applied them to the roof of my car it felt like I could pull them off with less then 80 pounds of effort.  Can you explain to me why this is happening?  My car is made of steel.  I have already had one sign blow off and I can’t afford to loose another one, please help.

Answer: Hello Scott,  Thank you for your post.  This is a common issue we have experienced with magnetic assemblies.  When Adams Magnetic Products or any other magnet manufacturer test their assemblies we base the results on a .375″ thick piece of steel (more…)

Question: Mark Records of Smith Valley, NV asks “How do I figure out how many pieces of 5″ x 7″ I can get out of a full roll of magnet sheet?  I am currently using 50′ long rolls and there seems to be a lot of scrap.  Are there different size rolls on the market?  I look forward to any suggestions. ”

Answer: Hello Mark.  The easiest way I know to calculate yield is to use Adams on-line sheet calculator.    This is a great automated tool that will take whatever magnet sheet size you input and give you a piece count.  This will enable you to quickly calculate the yield of our various size rolls.  Magnet sheet is commonly supplied in 50′ and 100′ roll lengths, but is available as long as 600′ by special order depending on the thickness. (more…)

Hello world! We’re excited to launch the first official blog for the magnet industry. We are engineers, salesmen, marketers, product managers, and executives from Adams Magnetic Products who offer different perspectives, but share the same passion for magnets and how they improve our world. We hope this blog provides you with a deeper insight into our work and who we are. We’re very excited to be out here talking to you!

At the end of each post, you can click on the author’s name to get bio and profile information. We’ll also have guest bloggers from the magnet industry and industries served by magnets to provide you with additional perspectives and insights.

Keep on the lookout for upcoming posts from our team members this week and beyond. If you’re interested, RSS and Atom feeds are available for all posts or specific categories. Let us know what you think by posting your comments below or by sending us e-mail at info@adamsmagnetic.com. And thanks for joining us in our newest venture.

Thanks so much for visiting our magnet blog. Enjoy!

- The Magnet Blog Team