Horseshoe Magnets
Alnico horseshoe magnets provide a compact, high power magnetic source, and are used for traction, lifting, sorting, clamping and retrieval. They are supplied with ground pole faces, painted and with metal keepers for storage and to help retain magnetic strength. Maximum operating temperature is approximately 1000°F.
Adams' alnico horseshoe magnets are made of cast Alnico 5 material. All dimensions approximate and as cast with pole faces ground smooth. Other sizes are available upon request.
To make ordering your magnets easier, just find the right size on the chart below, and note the Item #. Then contact us to place your order.
Contact us at 800-763-4795 if you don't see what you're looking for in this brief listing.
| A | B | C | D | Hole size | Pull Lbs | Item# |
| 1.570 | 0.980 | 0.980 | 0.787 | 0.197 | 19 | 40G0031 |
| 1.770 | 1.180 | 1.180 | 0.905 | 0.197 | 26 | 40G0010 |
Dimensions are in inches. Pull figures are maximum values; these will be achieved with smooth steel of adequate thickness where contact faces are intimate and clean.
